|
Real Sanitary Retractable Sensor Holder
The retractable sensor holder TracFix is of an
innovative design. It accommodates both the gel filled pH sensors and
the AppliSens LowDrift Dissolved Oxygen probes. The sensors are fixed
into the holder with a PG 13.5 threaded connector. The unique smart design
simplifies all handling. Design and construction ensure ease of maintenance.
The use of spare parts is minimized. The electrode can be withdrawn from
the bioreactor during operation for cleaning, calibration or even replacement
without any interruption to the process. When the electrode is retracted
during a process, it can be (steam) sterilized in place (outside the vessel)
before operators start with the maintenance procedures. The sensor can
be (steam) sterilized in place before re-introducing the sensor into the
vessel.
Two Types:
The TracFix is available as type A for vessels provided
with a standard DN25 side port and as type B for special 25mm side ports
(cylinder 52mm).
Materials Applied:
Silicone red O-rings and Stainless Steel 316L fully electro-polished
Features:
- High grade finish to facilitate cleaning (C.I.P.)
- Sensor tip protected by cage
- TracFix fully self draining
| Fig 1. TracFix type A with inserted
pH sensor |
Fig 2. TracFix type A with retracted
pH sensor |
|
