| 
Low Drift DO Sensor
The monitoring and control of Dissolved Oxygen
is one of the major parameters in a biotechnological process. This is
valid for fundamental research as well as for fermentation and cell culture
process research. AppliSens DO sensors are manufactured using state-of-the-art
technology and are delivered factory tested with membrane module in place.
The sterilizable LowDrift DO sensor offers a guaranteed low drift.
High grade finish to facilitate cleaning (C.I.P.)
The sensor is optimized for cleanability by having
a fully electropolished surface  .
Features:
- a free spinning PG13.5 connector: easy mounting
- shaft diameter 12mm
- all electrodes are delivered with a certificate: essential for GLP.
- Long-Life serial code print on sensor head: essential for GLP.
- stable current, broad linearity even after repeated sterilization
- broad linearity
- applicable with all currently available (polarographic) amplifiers
- the sensor can be mounted into virtually any brand of autoclavable or
Steam-In-Place bioreactor.
- a high quality, low noise cable
| |
1L
Applikon |
3
and 5L Applikon
3L NBS
3/5 Braun |
5L
Applikon
3L NBS
3/5 Braun |
5L
Applikon
7.5 NBS
6.6 NBS
5.0 Braun |
7
and 15L Applikon
20/70/110L BioClave
14L NBS |
SIP
|
| PH+ |
|
|
|
|
|
|
| 235 mm |
· |
· |
|
|
|
|
| 325 mm |
|
|
· |
· |
|
|
| 425 mm |
|
|
|
|
· |
|
| 590 mm |
|
|
|
|
· |
|
| 120 mm |
|
|
|
|
|
· |
| |
|
|
|
|
|
|
| DO sensor |
|
|
|
|
|
|
| 235 mm |
· |
· |
|
|
|
|
| 325 mm |
|
|
· |
· |
|
|
| 385 mm |
|
|
|
· |
|
|
| 590 mm |
|
|
|
|
· |
|
| 650 mm |
|
|
|
|
· |
|
| 800 mm |
|
|
|
|
· |
|
| 65 mm |
|
|
|
|
|
· |
| 110 mm |
|
|
|
|
|
· |
| AppliSens
Part # |
pH+
sensors |
| Z001012051 |
Sensor
pH+ 120mm 1-3L Vessel Assembly |
| Z001023551 |
Sensor
pH+ 235mm 2-5 L Vessel Assembly |
| Z001032551 |
Sensor
pH+ 325mm 2-5 L Vessel Assembly |
| Z001042551 |
Sensor
pH+ 425mm 5-10 L Vessel Assembly |
| Z001059051 |
Sensor
pH+ 590mm 10-20L Vessel Assembly |
| |
|
| AppliSens
Part # |
LowDrift
DO sensors (12 mm Diameter)* |
| Z010023520
|
Sensor
DO 110 mm 1L Vessel Assembly or Side entry for SIP unit |
| Z010023520 |
Sensor
DO 235 mm 2-5 L Vessel Assembly |
| Z010032520 |
Sensor
DO 325 mm 2-5 L Vessel Assembly |
| Z010038520 |
Sensor
DO 385 mm 5 -7 L Vessel Assembly |
| Z010059020 |
Sensor
DO 590 mm 10-20 L Vessel Assembly |
| Z010065020 |
Sensor
DO 650 mm 20-70 L Vessel Assembly |
| Z010080020 |
Sensor
DO 800 mm 70-110 L BioClave |
| AppliSens Part
# |
Cables pH /
Redox / DOLow (for 2-pin sensors) |
| Z100200010 |
Cable pH/ DOLow sensor L=2.0m
BNC |
| Z100380010 |
Cable pH/ DOLow sensor L=3.8m
BNC |
| Z100500010 |
Cable pH/ DOLow sensor L=5.0m
BNC |
| Z100200020 |
Cable for pH sensor + S-connector,
2.0m |
| Z100500020 |
Cable for pH sensor + S-connector,
5.0m |
| Z100200011 |
Cable T-pull pH/DOLow , L=2.0m,
BNC |
| Z100380011 |
Cable T-pull pH/DOLow , L=3.8m,
BNC |
| Z100500011 |
Cable T-pull pH/DOLow , L=5.0m,
BNC |
| Z100006010 |
Cable converter K9 ßà S7 pH sensor |
| Z100200030 |
Cable pH sensor DIN-plug, L=2.0m |
| Z100380030 |
Cable pH sensor DIN-plug, L=3.8m |
| Z110200030 |
Cable DOLow (2-pin) Lemo-plug,
L=2.0m |
| Z110380030 |
Cable DOLow (2-pin) Lemo-plug,
L=3.8m |
| |
DO
sensor accessories |
| Z110000420
|
Membrane
kit Diss.Oxygen Titanium |
| Z110002510 |
Electrolyte
Dis.Oxygen sensor 250ml |
| Z110005010 |
Electrolyte
Dis.Oxygen sensor 50ml |
| *Z110009010
|
Cable converter
2Pßà 4P DO sensor2-pin sensor to pre-existing 4-pin cable |
| Z110001000 |
Membrane
Test Kit DO sensor |
| Z110001010 |
AUTOCLAVABLE
Polarization Module 4Pin DO sensor |
| Z110001020 |
AUTOCLAVABLE
Polarization Module 2Pin Low Drift DOLow sensor |
| |
|
| |
Sensor
Holders |
| Z100002520
|
Sensor holder DN25 L=120 TracFix A |
| Z100002530 |
Sensor
holder DN25 L=154 TracFix B |
| Z101002510 |
Sensor
holder DN25 L=120 EasyFix A |
| Z101002511 |
Sensor
holder DN25 L=120 EasyFix A with glass bulb protection guard |
| Z101002520 |
Sensor
holder DN25 L=120 EasyFix B |
| Z101002521 |
Sensor
holder DN25 L=120 EasyFix B with glass bulb protection guard |
| |
type B
holders => these are only for Braun fermentors
with a sanitary port |
| Z100001810 |
Sensor
holder M18 - PG13.5 |
| Z100002710 |
Sensor
holder D27 - PG13.5 |
|
